Nitro Steel®
PACIFIC 1045 NitroSteel® is produced through a patented process combining nitro carburizing and surface oxidizing to produce a hard and corrosion resistant surface layer. This process produces a hard, thin, oxygen-enriched iron nitride layer at the surface of the steel (64 HRC min) with a nitrogen-hardened zone underneath. NitroSteel® offers superior performance because it is not plated or coated but STEEL itself.
Chemical Composition
Heat Analysis - ranges and limits %
Surface Hardness
64 HRC min. to 71 HRC max.
Wear Layer
.001" thickness per side
Hardened Diffusion Zone
.015"/.020" depth
Surface Finish
6-12 RMS max.
Appearance
Black luster
Corrosion Resistance
100 hrs. min. (per accelerated salt spray testing)
The Results:
-
Higher Corrosion Resistance
-
Better Lubrication Retention
-
Improved Wear Resistance
-
Increased Dent Resistance
-
Uniform Size End to End
-
Consistent Wear Layer Thickness
-
Non-toxic Alternative to Metal Plating
-
No Surface Pitting, Flaking or Hydrogen Embrittlement
-
Longer Service Life
The Results:
-
1/2" RD x 12' R/L
-
1-1/2" RD x 24' R/L
-
5/8" RD x 12' R/L
-
1-3/4" RD x 24' R/L
-
3/4" RD x 12' R/L
-
2" RD x 24' R/L
-
1" RD x 12' R/L
-
2-1/2" RD x 24' R/L
-
1-1/8" RD x 12' R/L
-
3" RD x 24' R/L
-
1-1/4" RD x 12' R/L
-
Other Sizes Available From Mill Stock