®
PACIFIC 1045 NitroSteel® is produced through a patented process combining nitro carburizing and surface oxidizing to produce a hard and corrosion resistant surface layer. This process produces a hard, thin, oxygen-enriched iron nitride layer at the surface of the steel (64 HRC min) with a nitrogen-hardened zone underneath. NitroSteel® offers superior performance because it is not plated or coated but STEEL itself.
A.I.S.I. 1045 micro-alloyed to achieve 75,000 PSI min. yield
SURFACE HARDNESS
64 HRC min. to 71 HRC max.
WEAR LAYER
.001" thickness per side
HARDENED DIFFUSION ZONE
.015"/.020" depth
SURFACE FINISH
6-12 RMS max.
APPEARANCE
Black luster
CORROSION RESISTANCE
100 hrs. min.
(per accelerated salt spray testing)
 |
 | |
| NitroSteel® compared to chrome after salt spray testing shows superior corrosion resistance. |
NitroSteel® piston rods and cylinder barrels extend actuator service life. |
The Results:
 | Higher Corrosion Resistance
| Better Lubrication Retention
| Improved Wear Resistance
| Increased Dent Resistance
| Uniform Size End to End
| Consistent Wear Layer Thickness
| Non-toxic Alternative to Metal Plating
| No Surface Pitting, Flaking or Hydrogen Embrittlement
| Longer Service Life
| |
Sizes and Lengths Available From Stock:
| 1/2" RD x 12' R/L | 1-1/2" RD x 24' R/L | |
| 5/8" RD x 12' R/L | 1-3/4" RD x 24' R/L | |
| 3/4" RD x 12' R/L | 2" RD x 24' R/L | |
| 1" RD x 12' R/L | 2-1/2" RD x 24' R/L | |
| 1-1/8" RD x 12' R/L | 3" RD x 24' R/L | |
| 1-1/4" RD x 12' R/L | Other Sizes Available From Mill Stock |
